Windlass Anchor Rode - 1/2" 3 Strand Nylon Rope Spliced to 1/4" G4 High Test Hot-Dipped Galvanized Chain
Three strand windlass anchor rodes are designed and constructed differently than throw over anchor rodes. Windlass rodes are assembled using 3 strand premium nylon rope spliced to G4 high-test calibrated chain. Twisted nylon rope maximizes the rode's shock absorption while reducing wear and tear on your windlass, anchor roller and ground tackle. The rope is coated and heat stabilized for minimum water absorption and fiber-to-fiber abrasion. High-quality nylon fibers reduce hardening of the rope, nearly eliminating all knots and hockles. The G4 hot dipped galvanized chain is calibrated to fit windlasses with ISO short link chainwheels. The combination of premium nylon rope and G4 high-test chain is suitable for all major windlass manufacturers. Please check your windlass manufacturers specifications to ensure a proper match.
Designed specifically for Windlasses
Premium nylon rope spliced to calibrated chain
Abrasion resistant
Shock absorbent

Compatible with all major windlass manufactures that accept 3-strand nylon rope- check your owner's manual prior to ordering!

Windlass Anchor Rode - 1/2" 8 Plait Nylon Rope spliced to 15 ft of Galvanized 1/4" Chain
When nothing but the best will do, you want Buccaneer rope. This rode uses premium Buccaneer brand rope and galvanized chain.
Our chain is high-test G4 short link. It is hot-dipped and with proper care, will provide years of use.
Buccaneer rope is manufactured in the USA in Scottsboro, Alabama. They have been serving the rope and cordage industry for close to 45 years. Buccaneer 8-plait has a more substantial lay that gives more grip when going through your gypsy. This premium rope is for the discriminate boater who wants the benefits of an 8-plait with a thicker hand feel.
Eight plait anchor rodes have a few distinct advantages over three strand rodes:
Eight plait rodes have a looser, bi-directional woven lay, allowing it to drape over itself, reducing air voids found between the coiled, denser line found in three-strand rodes. The more air in the locker, the less line capacity you're able to carry onboard.
Since the line has no bias clockwise or counterclockwise, the rope will not hockle or kink, allowing the windlass to manage the rope better.
Eight plait rope is able to absorb higher shock loads than three-strand rope
The combination of premium nylon rope and chain is suitable for all major windlass manufacturers. Please check your windlass manufacturers specifications to ensure a proper match. If you have ANY questions at all about what size rode you need for your chainwheel, please ask prior to ordering!
**All rodes must be soaked prior to use, otherwise snags and slippage can occur.
Ensure that you have the proper size and then soak from 2 to 24 hours before loading into your windlass.**
Compatible with Windlasses
Lewmar V700Lewmar Pro-Sport 550
Lewmar Pro-Fish 700
Lewmar Pro-Series 700
Maxwell HRC6
High-test galvanized chain is hot dipped
Splice is hand-woven and whipped in the US
8-Plait makes for a smaller splice to fit through your windlass
8-Plait rope takes up less space in your anchor locker
8-Plait will not hockle or kink