Made for superior performance featuring 1 inch wide premium nylon and heavyweight brass hardware. Triple-ply nylon cheek design, adjustable chin and rolled throat featuring solid brass throat snap. Throat snap is looped on for easy replacement. Box-stitched stress points for added strength.
Premium nylon material
Triple-ply cheek design
Box stitched stress points for added strength
Heavy-duty brass hardware
Oblong buckle holes and heat sealed edges
1" Nylon Halter
Heat Sealed Buckle Holes
Box Stitching at Stress Points
Brass Plated Hardware

This mini horse halter is made from 1" MFP (Poly) which has some advantages over typical nylon halters… it is soft and pliable being very comfortable for the animal, it is stretch and water resistant, UV resistant therefore won't fade in the sun as nylon is quick to do. It is a soft flexible material but very sturdy and reliable with a 600 lb tensile strength. The medium size will fit the typical adult mini. Medium: Nose = 16 inches; Crown (measured from the noseband area up and around the poll and down to the noseband area on the opposite side) = 23 to 28 inches. Large: nose = 19 inches; Crown = 24 to 29 inches. A QUICK MEASURE AROUND WHERE THE NOSEBAND SHOULD LAY WILL GIVE A GOOD INDICATION OF WHETHER A MEDIUM OR A LARGE WILL LIKELY WORK BEST FOR YOUR ANIMAL.
EASY TO MAINTAIN

The Hamilton Halter is a picture of strength and beauty that has been widely accepted by horse owners throughout America. Each halter is made of over 16 feet of 100-Percent nylon web, double sewn and triple-thick. Its 100-Percent nylon thread is sewn in a diamond tack design to give the halter form and rigidity for a superior fit. It is dramatically stronger than stitching in a single line or with a conventional bar tack. Five solid brass eyelets attached in burn holes give the halter a double wall of protection against eyelet fray. The three double-welded rings, two custom stress point squares and one double bar head buckle are designed to sit much flatter on the horse's head and eliminate any contact irritation. The 1D Halters and Arabian Halters come with a solid brass tip which makes buckling easier than ever before. It also gives the distinctive look that makes it a Hamilton Halter. Hamilton-The Cadillac of halters.
Product Dimensions ‏ : ‎ 22.5 x 10.75 x 1.25 inches; 1.6 Pounds
Item model number ‏ : ‎ 1DALSS AVRD
Date First Available ‏ : ‎ October 30, 2005
Manufacturer ‏ : ‎ Hamilton
ASIN ‏ : ‎ B003XV5CWO
Country of Origin ‏ : ‎ China

Single thick premium nylon for unparalleled quality
Quilted stitching for durable construction
Rolled throat for comfort
High break resistant hardware, leather head poll for breakaway safety adjustable chin strap halter for horse (800 to 1100 pounds )

HALTER WITH LEAD AND LEATHER NOSE STRAPDurable tan sisal ropeSteel clamp constructionEasy-to-adjust halter features a harness leather noseband UPC : 085845100016 Color : TAN Size : CATTLE Product Type : Livestock-handling Equipment / Halters
Product Dimensions ‏ : ‎ 10 x 9 x 2 inches; 11.2 ounces
Item model number ‏ : ‎ 173754
Department ‏ : ‎ unisex
Date First Available ‏ : ‎ October 15, 2006
Manufacturer ‏ : ‎ Beiler's Manufacturing
ASIN ‏ : ‎ B000HHJGWY

Item Package Height: 7.87
Item Package Length: 25.4
Item Package Width: 19.81
Country Of Origin: United States

The Hamilton Halter is a picture of strength and beauty that has been widely accepted by horse owners throughout America. Each halter is made of over 16 feet of 100% nylon web, double sewn and triple-thick. Its 100% nylon thread is sewn in a diamond tack design to give the halter form and rigidity for a superior fit. It is dramatically stronger than stitching in a single line or with a conventional bar tack. Five solid brass eyelets attached in burn holes give the halter a double wall of protection against eyelet fray. The three double-welded rings, two custom stress point squares and one double bar head buckle are designed to sit much flatter on the horse's head and eliminate any contact irritation. The 1D Halters and Arabian Halters come with a solid brass tip which makes buckling easier than ever before. It also gives the distinctive look that makes it a Hamilton Halter. Hamilton-The Cadillac of halters.
Product Dimensions ‏ : ‎ 17 x 8 x 1.5 inches; 13.6 ounces
Item model number ‏ : ‎ 3DA WNRS
Date First Available ‏ : ‎ January 1, 2010
Manufacturer ‏ : ‎ Hamilton Animal Products LLC
ASIN ‏ : ‎ B004KSPYAE
Country of Origin ‏ : ‎ China

Single Thick
Quilted stitching for durable construction
Highest Quality durable nylon webbing
Brass plated hardware
Hamilton Products - the most consumer appreciated in the world

This mini horse halter is made from 1" MFP (Poly) which has some advantages over typical nylon halters… it is soft and pliable being very comfortable for the animal, it is stretch and water resistant, UV resistant therefore won't fade in the sun as nylon is quick to do. It is a soft flexible material but very sturdy and reliable with a 600 lb tensile strength. The medium size will fit the typical adult mini. Medium: Nose = 16 inches; Crown (measured from the noseband area up and around the poll and down to the noseband area on the opposite side) = 23 to 28 inches. Large: nose = 19 inches; Crown = 24 to 29 inches. A QUICK MEASURE AROUND WHERE THE NOSEBAND SHOULD LAY WILL GIVE A GOOD INDICATION OF WHETHER A MEDIUM OR A LARGE WILL LIKELY WORK BEST FOR YOUR ANIMAL.
CUTE AND STYLISH 2 item bundle consisting of one miniature horse halter with coordinating overlay and one 3/8 inch 6ft. matching solid color lead
MAXIMUM COMFORT...1" Polypropylene for a soft comfortable feel
EASY TO MAINTAIN
LONG LASTING COLORS RESISTANT TO FADING
NICE COLOR SELECTION...Available in Turquoise, Pink, Blue, Orange, Red, Black, Purple, Maroon, Green and Brown

Tough1 Churchill Leather Adjustable Stable Halter with Snap A fine handmade halter of full weight leather with handsomely finished edges. Features: Solid brass trimmed with swedge buckle at head and snap at cheek Doubled and stitched cheeks Throat piece can be bent to the shape needed for the horse Adjustable nose Item Specifications: Color: Brown Sizing: Suckling 100 - 200 lbs; 3/4" wide leather Weanling 200 - 400 lbs ; 3/4" wide leather Pony 300 - 500 lbs; 3/4" wide leather Yearling 500 - 800 lbs; 1" wide leather Average Horse 800 - 1,100 lbs; 1" wide leather Large Horse 1,100 - 1,500 lbs; 3/4" wide leather *Please note: The throat piece may or may not arrive pre-bent for you. Either way, there is a wire inside the throat piece that can be bent to the shape needed for the horse wearing halter.
Product Dimensions ‏ : ‎ 18 x 10 x 2 inches; 12 ounces
Department ‏ : ‎ unisex-adult
Date First Available ‏ : ‎ March 13, 2013
Manufacturer ‏ : ‎ JT International
ASIN ‏ : ‎ B00BM8BAN0

Solid brass trimmed with swedge buckle at head and snap at cheek
Doubled and stitched cheeks
Throat piece can be bent to the shape needed for the horse
Adjustable nose

Breakaway Horse Halter, Padded Nose and Leather Crown. Safety Horse Halters that provide safety and a little class. Add a little splash to your tack room with this 1 inch wide Nylon web safety halter with bright silver metallic thread. For added comfort the nose band is padded. Your break away leather crown will come with double crown buckles and a adjustable nose. The rolled throat will have a square eye swivel snap. The hardware is heavy duty and silver in color to match the metallic silver thread. Color: Black w/silver, Green w/silver and Navy w/silver Size: Yearling, Cob, Full A matching lead with 20 inch Chain is available for 9.27.
Safety Leather Crown
Swivel Snap at Throat
Adjustable Chin
Package Weight: 0.612 kilograms